(SubWoofer Talk)

depends on ur amp. i wanted dual 4ohm cuz with my setup i have 1 sub and i wanted 2 ohm at the amp.

Guys dont boo me out I27Buick what with 2 of these amps would it be better with 2Ohm or 4Ohm,,, http://www.sonicelectronix.com/item_11639_Boss+CX3500D.html


Oh this is where I buy all my stuff at usally.... http://www.sonicelectronix.com/

honestly i really wouldnt buy a boss amp. i had a lanzar vibe 1200 and it spent more time in the shop then i used it. after that i only buy mid range and up products, also u don't have to buy a mono block amp, you can buy a 2 channel and bridge it to get more power out of it and maybe save some money.

edit: i think this is what i have. if i were to do it again i would buy just the step up version cuz i always want just a lil more power. its 300w rms at 2 ohms which is about 600w max but fosgates always do more then they say.


http://www.sonicelectronix.com/item_3262_Rockford+Fosgate+P3001.html

Man just give me the budget and I will pick some stuff out!!!

I got the prices guys just talkin about subs Mark Just for now my dad wants to replace the 8" sub thats in there. Hahha Lets throw an Orion HCCA in there lol..

just keep it all stock until it's time to upgrade. changing the 8" in the same enclosure won't do much except spend money. Dodge spent alot of money to get the most out of the space they could give up so changing it out would be useless.

What my dad wanted to do is switch out the 8" sub for a better one and probably re run the sub wires to the stock 506.6 Alpine Amp "Stock"
And put a port hole where the plastic sub box "Stock"...

Okay so no big subs for yall then, eh ?

So the new size requirement is a 8" sub ?
Here is a Entry Level DD 8" subs, should get some stuff moving with the right Amp.



http://www.ddaudio.com/amp/09/amp_z-se.htm

Not trying to be mean but that looks like an old Tower speaker are they GOod???

Found a websitefor the sub box I can go with 2 8",2 10" or 2 12". http://www.supercrewsound.com/commerce/product.jsp?prodId=68&catId=64
But the mounting depth is going to be search for it to fit the 12s I wanted to put sucks cant put L5s or L7s go with Solo Classic if I wanted to go with Kicker. Very nice box though but ill cut to rectangles in the box for the sub to breath a little more. Then need to put a amp in there yet research starts all over agin for subs that will fit lol....

digital designs is an high end speaker. i was gonna bring up that brand to look into. i would be honored to have a DD in my trunk making noise. i would rank then above JL audio subs.
also u do know u cant just put any sub into any box right?(just wondering) Well i guess u could BUT most subs are tuned to work in a certain size and style of box, plus most high end subs have huge magnet so u have to make sure the depth of the box can handle the depth of the sub it self.

Yea I27Buick Thats why for the biggest for that box I could only you the Solo Classic beacuse of the mounting depth. Ohh They are good well they wont fit anyway.... But Orion is better then both OOOOO lol HCCA

I would start hacking Chopping and Drilling in his car O.o

Make more airspace for the fking sub ...
they need the same space a 12 is using hahaha b/c the magnet is taking away half of that LMAO

Well right now if I even look like im unscrewing anything he will flip lol. Cant do anything right now the truck is at the shop the cruise control wont work and the trailer brake is shorted out.

PPPSSSSS. Dodge 1500 Ram Hemi Stock with 20inch rims cant pull for BrownBioSubstance Dad and I Miss the old Ford well big difference.

Ford= 750hp 1050tq
Our Dodge in the shop= 600hp 700tq
This piece of BrownBioSubstance stock Hemi with a 3.23 rear axle = WANNNNNNNNNNNNNN at 4,000rpm up a hill for 5 mins....

They should give us a Dodge Ram 2500 Cummins 6.7 beacuse all the freakin problems we been having with that truck. We only got to drive our truck in the shop for 2 days and he owned it for 2 half weeks already.

what did u guy do to that gasser to get those kinda of numbers?

Maaaan And i Thought You gotta me proud of American made cars if you r an american xD

I27Buick well its been in Mopar racing dept. for awhile lol... Here the list but we need to dyno though me and my dad are horsepower freaks.

Cams
Pistions
Injectors
Port and polish
Mopar Headers
3" exhaust all the back to tips
Vortec chip then piggie back with BullyDog GT Tuner
Mopar Cold air intake with Diesel size air cleaner

Stock is 390hp 407tq

But overall we looking in the 600's for hp and 600-700tq

But apperently Mopar Tech/Mech (What do you call em nowadays Swappers, Technician, Mechanics, Grease Monkeys ?) messed up somewhere and the car spends more time in the shop than anywhere else. You should use the 30 Day satisfaction Guaranty/Warranty and get another one. LoL xD see if they Honor that ... (They always advertise it as if its no hassle involved)

im a big car guy also i just cant afford cool car yet lol

have u dynoed it since the work was done? also if u guys tow a lot why go away from a diesel?

No we were planing on doing that though. Well we had to get rid of our diesel because the warranty went out it was clean for an 2005 King Ranch. Well because we went to gas because the price they were giving off on the ram 1500 Hemi 13,000 off sticker and plus the Dodge Cummins new 6.7 are so dam expensive.

And yes Andres they do do that. I think my dad is going to do that.