EVERYTHING RC: RC TOURING CAR, SC TRUCKS, RC DRIFT, RC OVAL, RC DRAG, RC BUGGY, RC TRUGGY, RC MONSTER TRUCK
 
HomeFAQRegisterLog in

Share | 
 

 Finished my pan cars today

View previous topic View next topic Go down 
AuthorMessage
snellemin

avatar

Posts : 478
Join date : 2010-03-09
Location : tomball

PostSubject: Finished my pan cars today   Thu Mar 18, 2010 10:22 pm

Dusted off my old mamba max and swapped out the 13awg wires with 12awg. Added 8 caps just so I can use high start power and overgear a bit. C40 6T Hacker motor for the super quick spoolups. Dean, I need the 235mm protoform body for this one.





I finally have the 12L running right. Super quick booger with the 12T C40 Hacker motor. Using the LT-200A esc with the cheapo 2200mah Turnigy that charges at 10A!


Back to top Go down
http://www.snelle-rc.com
ThaDestroyer



Posts : 58
Join date : 2010-02-04
Age : 28
Location : Spring/Klein, Tx

PostSubject: Re: Finished my pan cars today   Fri Mar 19, 2010 1:01 am

...we need to change your name to MadMan. Your crazy dude, that seems like a pretty high power setup for the little pan cars. Oh wait, EXCELLENT!! cheers
Back to top Go down
Dominator
Distributor
avatar

Posts : 353
Join date : 2010-02-04
Age : 45
Location : Cypress, TX

PostSubject: Re: Finished my pan cars today   Fri Mar 19, 2010 9:19 am

Very cool! Wanna sell 'em. LOL

-Dean
Back to top Go down
http://www.lonestarhobbies.com
-TC5racer-

avatar

Posts : 518
Join date : 2010-02-06
Age : 40
Location : Tomball, TX

PostSubject: Re: Finished my pan cars today   Fri Mar 19, 2010 11:15 am

It seems like you might be a little underpowered for those large, heavy cars!!! lol!

Looks good man
Back to top Go down
snellemin

avatar

Posts : 478
Join date : 2010-03-09
Location : tomball

PostSubject: Re: Finished my pan cars today   Fri Mar 19, 2010 12:29 pm

That little 12L is geared for 48mph. The bigger one for 100mph. But being realistic it probably will do 70mph tops with the little motor.
Back to top Go down
http://www.snelle-rc.com
-TC5racer-

avatar

Posts : 518
Join date : 2010-02-06
Age : 40
Location : Tomball, TX

PostSubject: Re: Finished my pan cars today   Fri Mar 19, 2010 2:15 pm

Idea I think you need to slap the Pletty in the Lynx II with some 1:1 gearing you know just for giggles Laughing well you might need some kind of trailer for the batts though
Back to top Go down
snellemin

avatar

Posts : 478
Join date : 2010-03-09
Location : tomball

PostSubject: Re: Finished my pan cars today   Fri Mar 19, 2010 2:39 pm

I tried sticking in the 1/8 LRP motor in there, but it was sticking out from the bottom. Kinda like it was dragging it's balls around. Or balls out power.
Back to top Go down
http://www.snelle-rc.com
THEANVIL

avatar

Posts : 799
Join date : 2010-02-12
Age : 21
Location : Cypress, TX

PostSubject: Re: Finished my pan cars today   Fri Mar 19, 2010 8:14 pm

hey would u have any hacker or feiago or any high power motors u would sell
Back to top Go down
snellemin

avatar

Posts : 478
Join date : 2010-03-09
Location : tomball

PostSubject: Re: Finished my pan cars today   Fri Mar 19, 2010 8:52 pm

Got to check what I have.
Back to top Go down
http://www.snelle-rc.com
THEANVIL

avatar

Posts : 799
Join date : 2010-02-12
Age : 21
Location : Cypress, TX

PostSubject: Re: Finished my pan cars today   Fri Mar 19, 2010 9:42 pm

aight What a Face
Back to top Go down
-TC5racer-

avatar

Posts : 518
Join date : 2010-02-06
Age : 40
Location : Tomball, TX

PostSubject: Re: Finished my pan cars today   Sun Mar 21, 2010 5:06 pm

Snellemin didn't you have a CMaxx you were going to sell for $150-$160 awhile back? Wink
Back to top Go down
snellemin

avatar

Posts : 478
Join date : 2010-03-09
Location : tomball

PostSubject: Re: Finished my pan cars today   Sun Mar 21, 2010 5:17 pm

Ah yes. I still have that one. I also have the rare B50 5s Hacker up for grabs. Need the RX8 or MMM and some ballsy batteries for that one.
Back to top Go down
http://www.snelle-rc.com
-TC5racer-

avatar

Posts : 518
Join date : 2010-02-06
Age : 40
Location : Tomball, TX

PostSubject: Re: Finished my pan cars today   Sun Mar 21, 2010 6:03 pm

B50 5s do you mean the super hard to get Hacker B50 5s that is the coveted Drag Racing motor correct......
So Wes this is not the Hacker you want for your Jammin' unless you only wanna run for a couple of mins and then wait for everything to cool down but you will have the fastest Jammin on the track but it's not a bashing setup. You would also have to invest in some serious batteries. See if snellemin will sell you the CMaxx and you would have a sweet setup well as soon as you decide on an ESC.

Romano what do you want for those motors? maybe i need another B50 No
Back to top Go down
snellemin

avatar

Posts : 478
Join date : 2010-03-09
Location : tomball

PostSubject: Re: Finished my pan cars today   Sun Mar 21, 2010 6:11 pm

Here's the B50 motor in action. Blew up my foam tire at launch. It's 1.09minutes into the video.

Back to top Go down
http://www.snelle-rc.com
-TC5racer-

avatar

Posts : 518
Join date : 2010-02-06
Age : 40
Location : Tomball, TX

PostSubject: Re: Finished my pan cars today   Sun Mar 21, 2010 6:17 pm

You gotta love that exploding foams lets see a Novak do that lol!
Back to top Go down
snellemin

avatar

Posts : 478
Join date : 2010-03-09
Location : tomball

PostSubject: Re: Finished my pan cars today   Sun Mar 21, 2010 6:21 pm

The LRP 1/8 motor had a 13mm rotor in it, kinda like the HV Novak. The Lehner motor that is the size of a mamba has a 19mm rotor! Talk about torque.
Back to top Go down
http://www.snelle-rc.com
-TC5racer-

avatar

Posts : 518
Join date : 2010-02-06
Age : 40
Location : Tomball, TX

PostSubject: Re: Finished my pan cars today   Mon Mar 22, 2010 8:29 am

Isn't the LRP like the Novak in the sense that they just made the X12 bigger. Is that right or did they do something different with the LRP.
Back to top Go down
snellemin

avatar

Posts : 478
Join date : 2010-03-09
Location : tomball

PostSubject: Re: Finished my pan cars today   Mon Mar 22, 2010 9:08 am

Yup its like the Novak. They made it longer and increased the shaft diameter to 5mm. The rotor diameter increased from 12.5 to 13mm.
Back to top Go down
http://www.snelle-rc.com
THEANVIL

avatar

Posts : 799
Join date : 2010-02-12
Age : 21
Location : Cypress, TX

PostSubject: Re: Finished my pan cars today   Fri Mar 26, 2010 3:53 pm

sp how much will u sell that hacker for and will it fit in the scrt10?
Back to top Go down
-TC5racer-

avatar

Posts : 518
Join date : 2010-02-06
Age : 40
Location : Tomball, TX

PostSubject: Re: Finished my pan cars today   Sat Mar 27, 2010 5:15 pm

it will fit with some dremel action on the ESC tray
Back to top Go down
Sponsored content




PostSubject: Re: Finished my pan cars today   

Back to top Go down
 
Finished my pan cars today
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» found a new book today,Cars of the 70's. pretty awsome
» 1 8" Pioneer bass tube. Free today only.
» RC cars anyone?
» Work super crazy today, Thank God for GR
» My other cars - past and present

Permissions in this forum:You cannot reply to topics in this forum
FORMULA D RC :: GENERAL SECTION :: R/C Tech Talk-
Jump to: